We supply a comprehensive range of products suitable for inclusion within the construction sector from flat roof ballast chippings through to screed flooring and self binding gravel.

By combining our extensive material knowledge and flexible production capability we are able to provide solutions to meet the most challenging criteria.

We are members of FeRFA, the Resin Flooring Association which represents the major product manufacturers, specialist contractors and surface preparation companies, raw material suppliers and specialist service providers within the UK Resin Flooring Industry.

As the association dedicated to seamless resin flooring for over 40 years, FeRFA leads the way in providing advice, guidance and training support.

Please click here to visit the FeRFA website for more information.

Specialised flat roof aggregates can help to protect flat roofing membranes from ultra-violet rays of the sun which cause deterioration and provide a protective layer for light traffic. Aggregates can also be used to weigh down the insulation on inverted roof designs. By laying fair coloured aggregates on the membrane, heat absorption is controlled. They can also provide a decorative area bringing the flat roof area into a usable environment for inhabitants to relax and enjoy.

To provide a reasonable embedment and interlocking opaque surface, stone sized approximately 10mm-20mm are suitable. Low porosity materials prevent water absorption, which can result in frosted slippery surfaces. Larger cobbles 50-75mm can also provide an effective and visually attractive solution.

Brett offer guidance and technical support for inverted garden roofing designs and work in partnership with contractors to assist with application. Contact our knowledgeable team on 0845 6080 572 or email sturryenquiries@brett.co.uk

Flat roof aggregates are available in mini bags, bulks bags and loose loads.

Brett offers a wide range of specialist screed flooring aggregates, used in a variety of applications and challenging environments including industrial, pharmaceutical, food processing, leisure industry, automotive, aeronautical and commercial arenas.

Colour, texture and slip resistance are just a few of the inherent qualities that these aggregates bring to screed floors. A selection of Flint sizes can be used as fillers to optimise and enhance product formulations. Materials can be coated to a specific pantone colour as well as the grading and texture being adapted to suit the requirements of the design parameters. For bespoke requirements such as this, contact our team on 0845 6080 572 or email sturryenquiries@brett.co.uk

Screeded flooring aggregates are available in mini bags, bulks bags and bulk tanker.  Dried Products should be stored under cover to keep dry.

Terrazzo flooring is a combination of dried aggregate and portland or epoxy-based binders. The wearing layer has an increased percentage of aggregate which is then honed to provide the finish required. Brett Specialized Aggregates offer a range of terrazzo flooring materials which, as part of a system, can offer an attractive and a durable hardwearing surface.
Depending upon the binder system used, our materials can be tough enough for use in high trafficked commercial and industrial environments and provide great resiliency, chemical resistance and compressive strength.

Areas of possible applications for these types of system include indoor surfaces in private or public commercial, business and recreational areas such as exhibition halls, conference centres, airports, restaurants, malls, hotels, shops, schools, offices and many more. .

The core range of terrazzo flooring aggregates is available in a variety of grades:

• Green, Silver or Black Granite (10, 14, 20)
• White Marble (14)
• Denbighshire Spar (8)

Working with designers or installers we can identify, source and grade bespoke products to meet specific requirements. Contact our knowledgeable team on specialist materials on 0845 6080 542 or email sturryenquiries@brett.co.uk

Our aggregates for use in terrazzo flooring installations are available in mini bags, bulks bags and loose bulk tankers. Dried Products should be stored under cover to keep dry.

Dried Aggregates are used within a resin bound system, often to provide a cost effective, hard wearing method of re-coating outdoor spaces and porous areas around tree pits. Brett supply a range of specialised aggregates which are used as component part of Resin Bound Gravel Surfacing. These materials are usually encapsulated within a proprietary resin obtained and installed by the contractor.

Our dried materials are used to provide a range of qualities including colour, slip and wear resistance and texture to outdoor areas such as around public buildings, cycle routes, pedestrian areas, footbridges, driveways and courtyards.

Resin bound gravel is an attractive and low maintenance alternative to Block and Flag Paving. The versatility of the surfacing technique means it can be applied to many different substrates, including concrete, wood or steel depending on the type of aggregate used.

A wide range of natural aggregates are available from our quarries giving us the capability to adjust grading to suit project specific criteria. By working closely with designers or installers we can identify, source and grade bespoke products to meet your specific design requirements as well as creating unique finishes to walls and floors by colouring to specific pantone colours.

If you are a specifier, contractor or home owner wishing to integrate aggregates into your project, or for assistance in sourcing bespoke products to match your design criteria, contact our team on 0845 60 80 572 or email sturryenquiries@brett.co.uk

Aggregates for use in resin bound surfacing are available in mini bags, bulks bags and loose bulk tankers. Please note that dried products should be stored under cover to keep dry prior to use.

When using colour coated aggregates we are able to offer virtually any colour to match the closest BS, RAL or Pantone reference. This is particularly useful when looking to match a required corporate or brand colour range.

Self Binding Gravel is regularly selected when seeking to install a surface which will bind together forming a compacted gravel path which is less susceptible to spreading, resulting in a neat golden finish. Providing these materials are installed correctly they will provide a low maintenance construction and provide a natural appearance, blending in with both contemporary and traditional surroundings.

Brett support our range of path gravel products with guidance and technical support. We can assist to help find the most appropriate specification and construction method required for your project. Unique Materials can be sourced to meet specific requirements for designs and application. Contact our knowledgeable team on this specialist materials on 0845 6080 542 or email sturryenquiries@brett.co.uk

Our self binding gravel aggregates are available in mini bags, bulks bags and loose loads.

As part of a resin glued system, Brett offers a range of aggregates which are suitable for inclusion within an appropriate resin to provide an effective slip resistant surface for pedestrian areas. Typical applications for these systems include stairs and temporary ramps as well as footpaths and temporary walkways.

Working with designers or installers we can identify, source and grade bespoke products to meet specific requirements. Contact our knowledgeable team on specialist materials on 0845 60 80 542 or email sturryenquiries@brett.co.uk

Our aggregates for use in temporary walkway surfaces are available in mini bags and bulks bags. Dried Products should be stored under cover to keep dry.

If you are looking for an aggregate to include within sound proofing materials, dried Flintag and Durite aggregates can be used to assist structural stability, help reduce resonance and act as a filler to optimise the product composition.

For bespoke design requirements, contact our team on the details below. We can blend or source unique materials to suit your requirements, down to the texture and colourways.

Brett offer guidance and technical support on sound proofing walls and floors and other noise insulation techniques, using dried aggregates. Working in conjunction with contractors or other suppliers, we can put together a plan for the application, specific to your project. Contact our knowledgeable team on 0845 6080 572 or email sturryenquiries@brett.co.uk

Our range of aggregates for use within sound proofing materials are available in mini bags, bulks bags and loose bulk tankers. Dried Products should be stored under cover to keep.